Table of Contents
Advertisement
(Enjoying
through External Equipment
Connecting
a recorder
Media Receiver (rear view)
t
AV cable
(commerciall _available)
S-Video cable
(commercially
available)
VCR controller
(for
presetting
digital TV
/
programs
for recording)
=
Connecting
other audio equipment
The digital
audio output
terminal
(optical)
on this system
carl
m
output
Dolby Digital
signals,
Using an optical
digital
cable,
connect
an AV receiver
to the digital
audio
output
terminal
(optical)
on the rear of the Media
Receiver, This allows
audio
_"
such as digital
TV broadcasting
to be played
in high quality,
=r
If your AV receiver
does not have a digital
audio
input terminal
(optical),
connect
the MONITOR
OUTterminals
(AUDIO)
on the
rear of the Media Receiver
to the audio
input terminals
on the
AV receiver,
NOTE
• When using the digital audio output terminal (optical), you need to
make settings depending on your AV receiver. For more information,
see the instruction
manual that came with the AV receiver,
Connecting
an AV receiver
Media Receiver (rear view)
VCR or DVD recorder
r'_
NOTE
• About the MONITOR OUT terminals
The MONITOR OUT terminals cannot output the following signals:
1 Video signals input from the COMPONENTVIDEO
terminal
2 Video signals from a personal computer
3 S-Video signals when a conventional
]M channel is being received
4 S-Video signals when Video signals (INPUT 1,2, and 4) are being
input
5 Digital video and audio signals from the HDMI terminals
• When watching
images played back on a VCR or DVD recorder
connected to the MONITOR OUT terminals, select an input source
(e.g., TV channel reception) on the recording equipment other than
external input sources. Selecting an external input source may result
in distorted images or noise.
• Analog broadcasting
signals are not sent to the MONITOR OUT
(S-VIDEO) terminal. This is also true of composite signals coming
from INPUT 1,2, or4,
AV receiver
En
Hide quick links:
Advertisement
Table of Contents
