Table of Contents
Advertisement
Matrix Software, cont'd
Tools menu
Assign device icons — Displays the complete set of input
Edit device palette — Allows you to add your own device
Audio-Input gain settings — Displays the audio gain
Audio-Output volume settings — Displays the audio
Mute-Outputs settings — Displays the Mute Adjust screen, from which you can
Update fi rmware — Allows you to replace the fi rmware that is coded on the
Hardware status — Provides an overall view of the status of the matrix switcher,
Figure 5-6 — Status window
MVX 128 A VGA Matrix Switchers • Matrix Software
5-8
and output device icons. You can drag any of these
icons to the input and output boxes.
icon graphics.
level setting for a single input or for all inputs and
allows you to change it. The level is expressed as
the magnitude (number of decibels) and polarity
(positive, gain or negative, attenuation) of the audio
adjustment.
output level setting for a single input or for all inputs and allows you to
change it. The level is expressed as a percentage of the input audio volume
that is applied to the output; 0% is full attenuation (audio is silent), 100% is
full volume.
mute video and/or audio for each input.
switcher's control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the fi rmware chip set. See Updating
fi rmware on page 5-5.
including the power supply voltages, the temperature status, the Remote
RS-232/RS-422 port confi guration, and the installed and updated fi rmware
status (fi gure 5-6).
Advertisement
Table of Contents
