Extron electronics MVX 128 User Manual page 38

Operation, cont'd
5.
Figure 3-30 — Unmute the outputs
N If both RGBHV and audio are selected, the unmute action toggles both the video
6.
Figure 3-31 — Press the View button to exit View-Only mode
MVX 128 A VGA Matrix Switchers • Operation
3-20
Press and hold the Output 3 button and the Output 4 button (fi gure 3-30)
for approximately 2 seconds until the LEDs light steadily. The output 3 and
output 4 video and audio signals are unmuted.
Press and hold the Output 3
and Output 4 button.
The LEDs stop blinking and light to indicate that the
RGBHV and audio outputs are unmuted.
= Blinking LED
and audio outputs. If either the video output or the audio output is already
unmuted, the muted output is unmuted and the unmuted output is muted.
Press and release the View button to exit View-Only mode (fi gure 3-31).
Press the View button
to exit View-Only mode.
CONTROL
The View LED returns
to the unlit state.
All input LEDs and output
SET VIEW
LEDs return to the unlit state.
3 4 5
OUTPUTS
2 seconds
3 4 5
OUTPUTS
Release the button.