Download Print this page

Maytag MIM1555YRS0 User Instructions page 6

Hide thumbs

Advertisement

Tools
needed:
Gather the required tools and parts before starting installation.
5/le" wrench
Flat putty knife
V4" wrench
Phillips screwdriver
Hinge pin
5_6"
Hex head hinge screw
Handle screw
End cap screw
Reverse
Hinges
1. Unscrew and remove the top hinge. Replace the screws in
the empty hinge holes.
2. Remove the screws from the bottom of the opposite side of
the ice maker cabinet. Turn the top hinge upside down so
that the hinge pin points up. Place the hinge on the bottom
opposite side of the ice maker and tighten screws.
3. Remove the plastic hinge pin sleeve from the "old" bottom
hinge and replace it on the new bottom hinge pin.
4. Remove the "old" bottom hinge screws and hinge. Replace
the screws in the empty hinge holes.
5. Remove the screws from the top of the opposite side of the
ice maker cabinet. Turn the hinge upside down so that the
hinge pin points down. Place the hinge on the top opposite
side of the ice maker and tighten the screws.
6. Remove the top hinge pin.
Remove door
Replace Door
1. Unplug ice maker or disconnect
power.
2. Remove the handle screws and handle (on some models).
Keep the parts together and set them aside.
3. Remove the hinge pin from the top hinge.
4. Remove the door from the hinges and screw the top hinge pin
back into the top hinge.
5. Reverse the door end caps as follows:
Remove the screw and end cap from the top corner.
Move it diagonally to the opposite side's bottom corner,
keeping the straight side of the end cap facing the front of
the ice maker.
Remove the screw and end cap from the bottom corner.
Move it diagonally to the opposite side's top corner,
keeping the straight side of the end cap facing the front of
the ice maker.
A
B
D
0
:
0
C
C
D
B
A
A. Top corner open (no end cap)
B. Beginning
top corner end cap
C. Beginning
bottom corner end cap
D. Bottom corner open (no end cap)
1. Place plastic hinge pin sleeve in the top hinge hole on the
door. Align the door with the top hinge hole and replace the
top hinge pin.
2. Replace the handle and handle screws.
Top Hinge
.......................
_A
,LI ..................
c
A. Hinge pin
B. Hinge pin sleeve
C. Hinge
D. Hex-head hinge screw
Bottom Hinge
J
6. Set the door aside.
D
A. Hex-head hinge screw
B. Hinge pin sleeve
C. Hinge
D. Hinge pin
6

Hide quick links:

Advertisement

loading

  Related Manuals for Maytag MIM1555YRS0

This manual is also suitable for:

Mim1554xrs1Mim1555yrs1Mim1554xrs2Mim1555yrs2