Operation Mode Selector - COMFORT-AIRE Comfort-Cire RAD-121B Owner's Manual

The controls look like this:
Controls
Operating Instructions
POWER
Operation starts when this button is pressed and stops when you press the button again.
FAN SPEED SELECTOR
For increased power while cooling, select a higher fan speed. 3 steps: High mLow m Med
ON/OFF TIMER
The timer can be set to start and stop the unit inhourly increments (up to 12 hours).
You will usually use shut-off time while you sleep.
For your sleeping comfort, once the timer is set, the temperature setting
will raise 2°F after 30 mins. and once again after another 30 mins.
OPERATION MODE SELECTOR
Select cooling mode to cool the room.
Select energy saver mode for energy saving
operation.
Select fan mode for basic ventilating fan operation.
Select dry mode for dry operation.
TEMPERATURE CONTROL
The thermostat monitors room temperature to
maintain the desired temperature.
The thermostat can be set between 60°F~86°F(16°C~30°C).
The unit takes an average of 30 minutes to adjust the
room temperature by I°E
REMOTE CONTROL SENSOR
_er failure, the unit reverts to previous operation setting.
)
Owner's Manual 17