Goldstar RI000 Owner's Manual page 9

The controls will look like one of the following.
Controls(12k~24k Series)
_ O_
o o o
.... J
POWER BUTTON
To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
This button t_es priority over any other buttons.
_:_J OPERATION MODE SELECTION BUTTON
Everytime you push this button, it wil! toggle COOL, FAN and DRY.
ON/OFF TIMER BUTTON
Everytime you push this button, timer is set as follows.(1 Hour-) 2Hours -) 3Hours -) 4Hours -)
5Hours -) 6Hours -) 7Hours -) 8Hours -) 9Hours -) 10Hours -) 11Hours -) 12Hours -) Cancel)
_l FAN SPEED SELECTOR
Everytime you push this bu_on, it is set as follows. (Hi[ F3 ] -) Low[ F L] e Med[ F2 ] e Hi[ _:3 ]-..)
ROOM TEMPERATURE SETTING BU_ON
This button _n automatically control the temperature of the r_m. The temperature can be set
within a range of 60 _ to 86 _ by 1 °F.
Select the lower number for lower temperature of the room.
AUTO SWING
-_-:_ This button can automaticaliy _ntrol the air flow direction.
ENERGY SAVER
:._I The fan stops when the compressor stops cooiing,
Approximately every 3 munutes the fan will turn on and check the room air to determine if c®ling is need_.
REMOCON SIGNAL RECEIVER
CAUTION:
When the air conditioner has been perfo_ its cooling operation and is
turn_ off or set to the fan position, wait at least 3 minutes before resetting to the cooling
operation again.