FOR YOUR RECORDS Write the model andl serial numbers here: Mode| # _rial You can find them on a ia_l on the side of t_ pr_Juct, D_ler's Nlame Date Pu=mhas_ lib Staple you_-receipt to thiis page in the e_nt nec_i it to prove @'_ted purchase or for warran#/iSSLJ_.
Precautions To prevent iniury to the user or other peop, le and property damage, the following instructions must be foil,owed. [] incorrect operation due to ignoring instructions wilil _us.e harm or diamage. The seriousness is classified by the folio,wing indications. [] Because of the weight of the product, it is r_ommended...
[] Operation • _twilli cause et_tric shock or • lit will cause eliectric sh_k • _hetwise, it will cause electric sh_k or fire fire_ fire • i't will _use electdc shock or • it will cause e_tdc sho_ o,No grounding may cause fire.
Page 5
. The air conditioner must be operated in a • Utmay cause .exp,losion, fire, and burn. enclosed area to, be most effective_ , Ut: wi!l cause electric shock or fai!lure of , Water may enter me unit and degrade the machine.
Page 6
,. it will waste power ° it may _use injury: • It may cau_ electric shock consumption in vain and it and damage. may cause accident, • it is an air conditioner, not:a • Since the fan rotates at high ,,This oouUdiniure the pet or spe_ during o_ration, it may...
Page 7
Operation Befot'e Plug in the, power cord properly. 2. Use a dedicated circuit. Overloading the line could create a fire hazard. 3. Iao not use an extension cord. See page 10 for more detaii]s. 4. Do not staWstop operation by plugging/unplugging the power cord.
Page 8
Int_uction This symbol aleds you to the risk of electric shock. This symbol aleds you to haza_s that could cause harm to the air conditioner. This symbol indicates s_cial notes. WARNING: This appliance should be ins_lled in accordance with national Electric Code.
Page 9
Electrical S afety WARNING: This appliance must be pro_rly grounded. The power cord of this appliance is. equipped with a three-prong grounding plug. To minimize the rusk of electric shock, use the plug with a standard three-slot grounding wall power outlet.. IIfthe power outlet does not include a grounding slot, have a qualified electrician replace the outlet before you use the room air conditioner,.
Page 10
We strongly discourage the use of an adapter due to potentia! safety h_ards. For temporary connections, use only a UL-lis.ted adapter, available from most local hardware stores. Ensure that the large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity connection. To, disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground terminal.
Page 11
in,staflation T/pe A:i6EA Type B:3EA _=::==:==::,,:2,,::_ TypeD:2EA TypeE:2EA Type F:2EA Type G:2EA (FRAME CURTAIN}, 1 I' Ty_ i,,,i:1 _ Type I:1EA Type J:t EA Type K:2EA (UPPER GUIDE} Type L:I EA Type M:! EA Type N:I EA Type O:1EA (DRAINJOINT PIPE) Have the, following tools available, for installation: * Screwdriver (Slotted and Phillips)
Installation This room air conditioner designed for installation in standard doubiehung windows with actual opening widths from 22" to 36". The upper andi lower window sash must open sufficiently to al!ow a clear ve_ical opening of i5" from the bottom of the. upper sash to the window stool.
Page 13
Ins_llation 1, Remove, the _rews which fasten the cabinet a,t both sides and at the back:, Use a long screwdriver and installing screws will be easier. 2. Slide the unit from the cabinet: by gdpping base pan handle and pulling forward while bracing the cabineL...
Page 14
Installation Caution: During the following hold unit firmly until window sash step, is lowered to top channel behind side _nel frames. Per_nal injury or property damage may result if unff falls from window. Open the window, MaA a line on _nter of' the window stool(or desired air conditioner location),...
Page 15
installation 9. A_ach each Frame Curtain the window sash using screws, (Type C).(See Figure 6) : DO NOT DRILL A HOLE IN THE BO_'OM PAN, The unit is designed t,o operate with approximately 1/2" of water in bottom pan, 10. Sllide the unit into the cabinet.(See Figure 7) •...
Page 16
Operating instructions If you turn off the air cond_ioner or switch from cooling to the fan, wait at least 3 minutes I_fore _tting to c_ling again.. Operation, ° Turns air _nditioner off. Med Fan ° M_ speed fan o_ration without ®oling. Low Fan - Low speed [an o[_rat_n without _oling, High Cool - Cooling with high sp_d fan operation.
Operating instructions The centre, is ]!ook like this" e.]Oturn the air co_itio_r O,N,pushthe butt®. [o turn the,air conditionerOFF,push the huron again. oThis _Jtton take. pdo,dtyover a_ other bu_ons. eWhen the unit is first powered up, it defaults to sdtings of High _oli at 7_ TEMPERATURE SETTING •...
Page 18
OperatL_g tnstructions AUTIO, N: The Remote Controller will not function properly if strong light strikes the sen_r window of the air cond_ioner or' if there are, obstacles between the Remote Controller and the air conditioner. • To turn the Set ON, push the button. To, turn the, Set OFF, push the button again. •...
Page 19
Instructions Operating Air Direction The direction of air can be _ntrotlied wherever you ,want to, c_,U by adjusting the horizontal louver and the vertical louver. • HOiR/ZONTA L AIR-DIR'ECTI_# C01'4 TROL The horizontal air direction is adjust_ rotating the verticall louver right or [eft. •...
Page 20
Maintenance and Service Air Filter Check the air filter at least twice a month to see if cleaning is neces_ry. Trapped particles in the filter can build up and blink the airflow, r_ucing _oling capacity and causing an accumulation of frost on the evaporaton To clean the air filter: Lift the inlet grille, Remove the air filter from the front grille by pulling the air filter up slightly: Wash the fiJter using Iiukewarm water below 40 °C (104 °F),...
Page 21
Mamte,na,nce and Servic_ i, If you want to pull out the filter upward, open the inlet grille slightly. Turn inside out the front grille,. Disassemble the in_et grille from the, front grille with separating the hing_ part by inserting a '_' type screw-driver tip_ Rotate the inlet grille i80 degrees and Figure 12...
Page 22
Maintenance and Service Before Calling for Service read] the following information If you have problems with your air conditioner, try to, solve the problem If you cannot find a solution, turn ,off the air ,_nditioner and contact your dealer, Air conditioner does not operate i ..Ensure that the air _nditiioneir isi plugg_...
Need help?
Do you have a question about the WG1000R and is the answer not in the manual?
Questions and answers