Goldstar RI000 Owner's Manual page 22

1 !. Cut the foam-strip ,%,to the proper length
and insert between the upper window sash
and the lower window sash.
(See Fig. 8)
Foam-StripQ
12. Attach the window locking bracket @ with
a type C screw. (See Fig. 9)
Window locking bracket @
13. Attach the front grille to the cabinet by
inserting the tabs on the grille into the tabs
on the front of the cabinet. Push the grille
in until it snaps into place.(See Fig.10)
14. Lift the inlet grille and secure it with a type
A screw through the front grille.
(See Fig. 11)
Fig. 10
Fig. 11
Fig. 12