Goldstar RI000 Owner's Manual page 27

5. Pull each Frame curtain fully to each window
sash track, and pull the bottom window sash
down behind the Top retainer bar until it
meets.
6. Attach each Frame curtain the window sash
by using screws (Type C.) (See Fig. 10)
7. Slide the unit into the cabinet.(See Fig. 11 )
CAUTION:
For security purpose,
reinstall screws(Type A) at cabinet's sides.
Screw
PowerCord
Screw (Ty_ A)
Fig. 1 i
8. Cut the Foam-strip to the proper length and
insert between the upper window sash and
the lower window sash.(See Fig. 12)
9. Attach the Window locking bracket with a
screw (Type C.) (See Fig. 13)
I I II I/WindowlockJng
Fig. 13
10. Attach the front grille to the cabinet by
inserting the tabs on the grille into the tabs
on the front of the _binet. Push the grille in
until it snaps into place.(See Fig.l 4)
11. Lift the inlet grille and secure it with a screw
(Type A) through the front grille.(See Fig. 14)
Fig. 14
12, Window installation of room air conditioner is
now completed. See ELECTRICAL DATA for
attaching _wer cord to electrical outlet.
,Fig. 15