Panasonic SC-HT733 Operating Instructions Manual page 8

Radio and system connections
oConnect the AC power supply cord after all other connections are complete.
oOptional antenna connections (-_ page 25).
/FM indoor antenna
Affix this end of the antenna where
.... reception is best.
Adhesive tape
The illustration shows SC-HT730
for U.S.A. and Canada.
Main unit
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other
wires and cables.
Catch up
To disconnect
Press the catch
and pull out.
I _ t l i-;.i t_,;. k-]l :_:( _ :_ li | II_'t_IlI;.i i [ • Ill_o _ i
Before connecting the AC
power supply cord
Set the voltage.
_127 V _ 110 V _ 220 V-230 V _ 240 V
VOLT ADJ
Use a flat-head screwdriver to turn the
voltage selector on the back of the
subwoofer to the appropriate position for
the area in which this system is used.
If the power supply in your area is 115 V or
120 V, please set the voltage selector as
follows:
oFor 115 V: Set to 110 V.
oFor 120 V: Set to 127 V.
Active subwoofer
/ A? power su, p p?or I......
' _,;_2_ *'_ olf the power plug does not fit
your AC outlet
Use the power plug adaptor
......... (included).
To household If it still doesn't fit, contact an
AC outlet electrical parts distributor for
assistance.
Conserving power
The main unit consumes a small amount of power, even when it is turned off (For U.S.A. and Canada: approx. 0.5 W or for other areas: approx.
0.9 W). To save power when the unit is not to be used for a long time, unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the unit.
The included AC power supply cord is for use with this unit only. Do not use it with other equipment.