Panasonic SC-HT733 Operating Instructions Manual page 24

.£
buttons
tUNER/BAND
CRy
TUNE MODE MEMORY
1
2
Press [TUNER/BAND] to select "FM" or
"AM".
Press the numbered buttons to select the
channel.
Alternatively, press [A CH v].
To select a 2-digit number
e.g. 12: [>10] -_ [1] -_ [2]
When a stereo FM broadcast is being received.
• If noise is excessive in FM
Press [FM MODE] to display "MONO".
iNPUT SELECTOR FM MODE v TUNING ^
Press [FM MODE] again to cancel the mode.
The mode is also canceled when you change the frequency.
Up to
1
2
3
4
15 stations can be set in each band, FM and AM.
Press [INPUT SELECTOR] to select "FM" or
"AM".
Press [TUNE MODE] to select "MANUAL".
Each time you press the button: MANUAL_PRESET
Press [v TUNING ^] to tune to the lowest
frequency (FM: 87.9 or 87.5, AM: 520).
Press and hold [MEMORY].
Release the button when "FM AUTO" or "AM AUTO" is
displayed.
The tuner presets all the stations it can receive into the
channels in ascending order.
o"SET OK" is displayed when the stations are set, and the
radio tunes to the last preset station.
o"ERROR" is displayed when automatic presetting is
unsuccessful. Preset the channels manually (-) right).
1
2
3
Press [INPUT SELECTOR] to select "FM"
or "AM".
Press [TUNE MODE] to select "MANUAL".
Press [v TUNING ^] to select the
frequency.
Press and hold [v TUNING A] until the frequency starts
scrolling to start automatic tuning. Tuning stops when a station
is found.
• Presetting the channel
Up to 15 stations can be set in each band, FM and AM.
Z While listening to the radio broadcast
Press [ENTER].
,2 While the frequency and "PGM" are flashing on the display
Press the numbered buttons to select a channel.
Alternatively, press [A CH v], then press [ENTER].
eTo select a 2-digit number
e.g. 12: [>10] -) [1] -) [2].
RQT7972 The station occupying a channel is erased if another station is
preset to that channel.