Panasonic SC-HT733 Operating Instructions Manual page 7

Connecting speakers with the subwoofer
• Attach the speaker-cable stickers to make connection easier,
• The terminals of the subwoofer have high output power. Carefully connect the speaker wires.
Speaker-cable sticker
ACTIVE
SUBWOOFER
(2_ FRONT (R)
<_}FRONT (L)
@ SURROUND (R)
_3}SURROUND (L)
The illustration shows SC-HT730
for U.S,A. and Canada.
<5)CENTER
oiH_o Even though the subwoofer shown is different, you can connect the speakers to the subwoofer in the same way.
• Never short-circuit positive (+) and negative (-) speaker wires.
• Be sure to connect only positive (n'i'_ _: white, HT-930: copper) wires to positive (÷ / terminals and negative (11_i_! _: blue,
_H_O: silver) wires to negative (-) terminals. Incorrect connection can damage the speakers.
Video connections
• Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly.
• Turn the television off before connecting, and refer to the television's operating instructions.
• Television with a VIDEO IN terminal • Television with COMPONENT VIDEO IN terminals
Television
Television Sack of the Video cables (not included)
Back of the ...... Video cable (not included) main unit
main unit
(inc}uded)
• Television with an S-VIDEO IN terminal
Sack of the Television
main unit ..... (not included)
S-video cable
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal by separating the chrominance (C) and
}uminance (Y) signals. (Actual results depend on the television.)
COMPONENT VIDEO OUT terminals
These terminals can be used for eitt_er interlace or progressive
output and provide a purer picture than the S-VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (PdPR) and luminance signal (Y} separately in
order to achieve high fidelity in reproducing colors.
• The description of the component video input terminals depends
on the television or monitor (e.g. WPdPR, Y/B-Y/R-Y, Y/CdCR).
Connect to terminals of the same color.
• After making this connection, select "Darker" from the "Black
Level Control" in the "Video" tab (-_ page 23).
a fat _ti_ _
II III IW I!. I I }1 lit /1 /J z, l, J_ _