Panasonic SC-HT733 Operating Instructions Manual page 32

o
4_
#.
RQT-_T2
Before requesting service make the following checks If you are in doubt about some of the check points or If the soluhons indicated in the chart
do not solve the problem refer to the 'Customer Services Directoly" on page 35 if you leside in the U S A or refel to the 'Product infol matRon" on
page 34 if you leside in Canada
In othel areas consult your dealer
Power
No power. • Insert the AC power supply cord and system cable securely
The unit is automatically •The Sleep turner was working and had leached the set time hrnit
switched to the standby mode.
Unresponsive or inoperable function
No response when any buttons
are pressed.
No response when remote
control buttons are pressed.
Cannot play DVD's.
No picture or sound.
You have forgotten your ratings
_assword.
Reset all the settings to Factory
Preset
• This unit cannot play discs other than the ones hsted m these operating instructions
• The umt may not be operahng properly due to hghtnmg, static electricity or some other external
factor Turn the unit off and then back to ON Alternatively, turn the unit off, disconnect the AC
power supply cord, and then reconnect tt
• Condensatton has formed Wait 1 to 2 hours for it to evaporate
• Check that the batteries ate installed correctly
• The batteries are depleted Replace them with new ones
• Aim the remote control at the remote control s_gnal sensor and operate
• CD Mode is on Press [SHIFT]+[CD MODE] to turn CD Mode off
• Check the wdeo or audio connection
• Check the power or input sethng of the connected equipment
• Check that the DVD-RAM has something recorded on it
• While stopped and 'DVD/CD" Is the source, press and hold re] on the mare unit and [>10] on
the remote control unttl "lnltlahzed" disappears from the telewslon Turn the untt off and on again
All settings wtll return to the default values
11
m
9
9
10
14
4,5,
7, 28
Specific operation undesirable or unexpected
It takes time before play starts. • Play may take t_meto begin when an MP3 track has still picture data Even after the track starts,
'MP3 the correct play hme w_ll not be d_splayed Th=s _snormal
Folders deeper than the eighth
layer on a data CD are not
displayed correctly.
WMA MP3 JPEGJ
A menu screen appears during
skip or search. :_,'_"_:;_
Playback control menu doesn't
appear. [_'_:;,:_,:_ wtth playback control
The program and random play
functions do not work.
Programmed items are not
played.
The on-screen menu shows "2"
as a soundtrack option when
[AUDIO] is pressed, but the
audio does not change.
Play restarts from the beginning
of the track when soundtrack is
changed.
Scenes are skipped
intermittently. _
• Folders deeper than the eighth layer are displayed as the eighth layer
• This Is normal for Video CD's
• Press re] twice and then press [1_] tplay)
• These functtens do not work wtth some DVD-Vtdeos
• Some items cannot be played even if you have programmed them
• Even tf a second seundtrack isn't recorded, two numbers will normally be shown
• Thts ts normal on DVD-Audto
• If you change the volume or sound fleldtqual_ty setting during ADVANCED DiSC REVIEW, the
functton continues without the on-screen display Press [ADVANCED DISC REVIEW] again to
cancel the function
m
D
m
D
m
D
m
14
Subtitle
Subtitle position is wrong,
No subtitles,
The subtitles overlap closed
captions recorded on discs,
Marker
Cannot add markers,
A-B repeat
Point B is automatically set.
A-B repeat is automatically
canceled,
Sound abnormal or improper
Sound distorted.
Effects do not work,
Humming is heard during play.
No sound
• Adjust the pos_t_on ("Subtitle Pos_hon" m D_splay Menu)
• Display the subtitles
• Clear the subtitles
• You cannot add markers with DVD-RAM
• If the disc's elapsed play time doesn't appear on the unit's display, you cannot add markers
• The end of an _tem becomes point B when it is reached
• A-B _epeat is canceled when you p_ess [QUICK REPLAY]
• No_se may occur when playing WMA
• Some audio effects do not work or have less effect with some discs
• Multi Re-master (HTLHT_0 only) and Dolby Pro Logic li do not work if you have changed the play speed
• An AC power supply cord or fluorescent light is near the subwoofer Keep other appliances and
cables away from the subwoofer
• The_e may be a pause in sound when you change the play speed
15