Panasonic SC-HT733 Operating Instructions Manual page 23

TV Type
Select to suit the type of television.
Time Delay
When connected with a Plasma
display, adjust if you notice the audio
is out of eync with the video.
Still Mode
Specify the type of picture shown
when paused.
Black Level Control
Change the black level of the picture if
you connected a television through the
COMPONENT VIDEO OUT terminals.
• "Audio" tab
Dynamic Range Compression
• Standard (Direct View TV) e CRT Pr0jector e LCD T'v'!Projector
• Projection TV • Plasma TV
e0ms • 20ms • 40ms • 60ms • 80ms • 100ms
• Automatic
• Field: The picture is not blurred, but picture quality is lower.
eFrame: Overall quality is high, but the picture may appear blurred.
e_: When connected through VIDEO OUT or S-VIDEO OUT.
eDarker: When connected through COMPONENT VIDEO OUT (Y/PB/PR).
• Off
eOn: Adjusts for clarity even when the volume is low by compressing the range of the lowest sound
level and the highest sound level. Convenient for late night viewing. (Only works with Dolby
Digital)
Speaker Settings (-) below) eCenter: 0.0/1.0/2.0/3.0/4.0/5.0 ms
Set the delay time for your center and • Surround (L/R): 0.0/5.0/10.0/15.0 ms
surround speakers.
• "Display" tab
Menu Language •_ • Fran_ais • Espa_ol
On-Screen Messages • On • Off
• "Others" tab
FL Dimmer e_ • Dim (_ Jog LED turns off.)
Changes the brightness of the unit's • Auto: The display is dimmed, but brightens when you perform some operations.
display (and Jog LED _). (_ Jog LED turns on when you perform some operations.)
QUICK SETUP •Yes •No
Re-initialize Setting eYes: The password screen is shown if "Ratings" (-) page 22) is set. Please enter the same
This returns all values in the Setup password. After "INIT" on the display disappears, turn the unit off and on again.
menus to the default settings. • No
(Effective when playing multi-channel audio)
(Center and surround speakers only)
For optimum listening with 5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position. If you have to place the center or surround
speakers closer to the seating position, adjust the delay time to
make up for the difference.
_ij : Actual speakers position
i_'_'_-_] : Ideal speakers position
_ _)_c_ : Primary listening distance
1 Press [A, y] to select the delay time box and press
[ENTER],
2 Press [A, _'] to adjust the delay time and press [ENTER],
Center delay time
Exit
Approximate room dimensions
Circle of constant primary listening distance
If either distance _ or @ is less than (_, find the difference in the
table and change to the recommended setting.
30 cm (1 foot)
60 cm (2 feet)
90 cm (3 feet)
120 cm (4 feet)
150 cm (5 feet)
1.0 ms 150 cm (5 feet) 5.0 ms
2.0 ms 300 cm (10 feet) 10.0 ms
3.0 ms 450 cm (15 feet) 15.0 ms
4.0 ms
5.0 ms
Surround delay time
To finish the speaker setting
Press [<] to select "Exit" and press [ENTER].
When you change the surround speaker setting for Dolby Digital, the
setting also changes for Dolby Pro Logic II.
e.g., the settings for MUSIC are the same as those for Dolby Digital.
0 ms 0 ms 10 ms
5 ms 5 ms 15 ms
10 ms 10 ms 20 ms
15 ms 15 ms 25 ms
RQT7972