How To Disassemble And Assemble; Door - LG LSC27990TT Service Manual

HOW TO DISASSEMBLE AND ASSEMBLE
1. DOOR
1) Remove lower cover and then disconnect water
supply tube in the lower part of freezer door.
• Pull the water supply tube (_)forward while pressing on
the coupling (_ as shown in the drawing.
,_ Disconnecting the tube under the door about
causes
3 pints (1.5 litters) of water to flow out. Use a big
container to catch it.
Note : Connect the same tube color.
2) Remove the a freezer door.
(1) Loosen hinge cover screw of freezer door and remove
the cover.
Disconnect all connecting lines except grounding cord.
jHinge Cover
Cord
Earthij "<"
Connecting
Line
J
(2) Turn hinge lever in arrow (A_, d irection until it is
loosened and take it out in arrow _, direction.
Him e Lever
(3) Disconnect upper hinge (_) from the hinge supporter (_)
by grasping the front part of upper hinge and lifting up
(Hinge Assembly, U) in arrow direction _A_ and pull
forward in arrow _ direction. Be careful because the
door may fall, damaging the door, the floor, or injuring
you.
(4) Lift up the freezer door (_ in arrow direction and
disconnect the door from the lower hinge (_). Don't pull
the door forward.
Note : • Lift up the freezer door until the water supply tube
is fully taken out.
(5) Assembly is the reverse order of disassembly
Note : • When disconnecting refrigerator door, turn hinge
lever counterclockwise.
• If the hinge or bracket are bent during assembly,
use two extra screws (Tap Tite M6, Left Hinge
attaching screw) in the holes of the upper hinge.
- 94 -