Digitalwipe Mode - Panasonic Palmcorder PalmSight PV-L779 Operating Instructions Manual

Digital Still Camera
II Hr_ IkV;jl,z_LvAr_ [ :m
Insert a Captured still image into the current recording, or vice versa, in one of three wipe
effects, Before you begin...
2 3
[]
MODE
PoP 8P
WIPE1 -_WlPE2 "_WlPE3 J
START _/ _11_111_,-_
(*'r°'"re") I L 1
WIPE 1 V WIPE 2 _' WIPE 3 •
'._J
ST_]AR T _ [_ (C_ptur_ I_m)
(second press)l
WIPE 1 _WlPE 2 _'
• Connect Camcorder to power source.
• Insert the CofnpactFlash Card (page 51).
• Set POWER to CAMERA.
1
2
3
Repeat step 1 and 2 on page 58 to
set Picture in Picture Wipe title.
Press MODE repeatedly for Wipe
effect 1, 2, or 3 (See left).
• WIPE 1 will flash for a while to store
the image for the wipe.
Press START:
once _ inserts captured image.
twice _ inserts current recording
picture.
• You can freeze the wipe in progress
by pressing START. Press START
again to resume wipe.
Note:
• If CompactFlash Card is not inserted,
"NO CF CARD" appears on-screen. Set
Power to OFF, then insert the
CompactFlash Card.
• Pictures captured with other brand
products cannot be used with this
Camcorder.
• If _INCOMPATIBLE IMAGE _ appears
on-screen, the size of the captured
image cannot be played back on this
Camcorder.
• If "CF CARD ERROR" appears
on-screen, see page 80.
• If Digit__l Wipe mode is selected, the
following functions are not available:
Security mode, Auto Fade, Digital Fade,
Digital Filter, Digital Zoom, Digital E.I.S.,
Still/Strobe/Wide.
59