Picture In Picture Wipe Title - Panasonic Palmcorder PalmSight PV-L779 Operating Instructions Manual

Digital Still Camera
mm -=]r'o] (! i][_.]m n _ _l!li[_vlYj n,I:lm/i| [_
Captured still images (pages 52, 53) can
be recorded along with the current picture.
Before you begin...
• Connect Camcorder to power source.
• Insert the CompactFlash Card (page 51).
• Set POWER to CAMERA.
1
MODE
Still image
Movim
Picture
Multi image playback page number
2
58
( P - P = Picture in Picture )
1
2
3
Set DIGIT_AL SELECT to DIGITAL
WIPE,
• A still image captured on the CF
card and the Multi image playback
page number is displayed on the
right side of the screen.
• If there are no recordings on the
card, "NO PICTURE" appears
on-screen.
Press +__ or -R_ to select
still image to be used.
Start recording (page 22).
• When recording starts, Multi image
playback number disappears. Then
the capture still images can be
recorded along with the current
picture.
• To exit from the Picture in Picture
Wipe title mode, press MODE
(page 59).
Note:
• If CompactFlash Card is not inserted,
"NO CF CARD" appears on-screen. Set
Power to OFF, then insert the
CompactFlash Card.
• PiCtures captured with other brand
products cannot be used with this
Camcorder.
• If "INCOMPATIBLE IMAGE" appears
on-screen, the size of the captured
image cannot be played back on this
Camco_der.
• If "CF CARD ERROR" appears
on-screen, see page 80.
• If Picture in Picture Wipe Title selected,
the following functions are not available:
Security mode, Auto Fade, Digital Fade,
Digital Filter, Digital Zoom, Digital E.I.S.,
Still/Strobe/Wide.
I ;[.] _e_, k-,,i,.--] [..,_ p ,ii [_:._. ! ili ll¢{0TO_.,li li nm ".,F,I _F-TIFM.[.',pj