Pc Connection - Panasonic Palmcorder PalmSight PV-L779 Operating Instructions Manual

PC Connection
A live or captured image can be transferred to your PC (Personal Computer).
t._ 1;t ii i ll;t.; U,i 114 iiI;l il _"t 1.11 ii iii| 1 i II i'Iil ilI.,.'t ilil i
• IBM PC/AT or compatible.
• Microsoft Windows®95 or Windows®98.
• Intel ® Pentium ® Processor.
• RAM: 16 MB or more
• 2 MB of available hard-disk space.
• 256 color monitor (full color recommended).
• 3,5 inch 1,44 MB floppy disk drive (for installation),
• RS-232C serial port (D-Sub 9-pin). An adaptor (D-Sub 9-pin male to
a D-Sub female) is required for a D-Sub 25-pin.
• Mouse or other pointing device.
Connect Camcorder PC jack to the serial
port on your PC (Personal Computer)
using the supplied PC connector cable.
Refer to PC or Windows manual to identify
which COM port to be used for connection.
PC Connector cable _
(supplied)
Before you begin...
• Turn your PC off.
• Set Carncorder POWER to OFF.
Note:
• Be sure to turn PC off before connection
for properly image transfer.
• After Camcorder and PC are connected
by starting up the software included,
video recording is not possible.
RS-232C Serial Port
(Default is COM1)
" _ (D-Sub 9-pin) ,
PC Connector
61