MSI RC410M-L - MBOX - 0 MB RAM User Manual page 47

MS-7173 M-ATX Mainboard
the processor will use only one core to execute the instructions. Please disable
this item i f y our operating sy ste m doesn't support HT F unction, or
unreliability and instability may occur.Settings: [Enabled], [Disabled].
MSI Reminds You...
Enabling the functionality of Hyper-Threading Technology for your
computer system requires ALL of the following platform Components:
* CPU:
* Chipset: An Intel
* BIOS:
* OS:
For more information on Hyper-threading Technology, go to:
www.intel.com/info/hyperthreading
IOAPIC Function
This field is used to enable or disable the APIC (Advanced Programmable Interrupt
Controller). Due to compliance with PC2001 design guide, the system is able to run in
APIC mode. Enabling APIC mode will expand available IRQ resources for the system.
Settings: [Enabled], [Disabled].
M PS Table Version
This field allows you to select which MPS (Multi-Processor Specification) version to
be used for the operating system. You need to select the MPS version supported by
your operating system. To find out which version to use, consult the vendor of your
operating system. Settings: [1.4], [1.1].
Full Screen LOGO Display
This item enables you to show the company logo on the bootup screen. Settings are:
[Enabled]
[Disabled]
Boot Sequence
Press <Enter> to enter the sub-menu and the following screen appears:
3-10
®
An Intel Pentium
®
Chipset that supports HT Technology;
A BIOS that supports HT Technology and has it
enabled;
An operating system that supports HT Technology.
Shows a still image (logo) on the full screen at boot.
Shows the POST messages at boot.
®
4 Processor with HT Technology;