Table of Contents
Advertisement
7. Align the notch on the bottom of the module with the tab in the connector.
1
cutouts (2)
3
notch
CAUTION:
To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of
the module.
8. Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
9. Replace the computer cover (see
10. Connect your computer and devices to electrical outlets, and then turn them on.
If the message appears stating that memory size has changed, press <F1> to continue.
11. Log on to your computer.
12. Right-click the My Computer icon on your Microsoft
13. Click the General tab.
14. To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
Back to Contents Page
2
memory module
4
tab
Replacing the Computer
Cover).
®
®
Windows
desktop and click Properties.
Advertisement
Table of Contents
