Replacing The Media-Card Reader - Dell Alienware Aurora R4 Owner's Manual

1 media-card reader
3 FlexBay dock

Replacing the Media-Card Reader

1 Slide the media-card reader into the FlexBay dock.
2 Replace the screws that secure the media-card reader to the FlexBay dock.
3 Lift the securing tab and slide the FlexBay dock through the front of the
computer until the securing tab snaps into place.
4 Connect the FlexBay USB cable to the FLEXBAY connector on the master
I/O board. For more information on the location of the connector, see
"Master I/O Board Components" on page 21.
5 Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
6 Replace the left side-panel. See "Replacing the Left Side-Panel" on
page 27.
7 Lift the drive panel towards the top of your computer until it snaps into
place.
Media-Card Reader
1
2 screws (4)
2
3