Replacing The Master I/O Board; Postrequisites - Dell Alienware Aurora R4 Owner's Manual

1 master I/O board

Replacing the Master I/O Board

1 Align the screw holes on the master I/O board to the screw holes on the
chassis and place the master I/O board in the chassis.
2 Replace the screws that secure the master I/O board to the chassis.
3 Route and connect the cables that you removed from the connectors on
the master I/O board.
NOTE:
Board Components" on page 21.

Postrequisites

1 Replace the PCI-fan. See "Replacing the PCI-Fan" on page 54.
2 Replace the drive-bay shroud. See "Replacing the Drive-Bay Shroud" on
page 48.
100
Master I/O Board
1
2 screws (4)
For information on master I/O board connectors, see "Master I/O
2