Postrequisites; Installing Dual Graphic Cards - Dell Alienware Aurora R4 Owner's Manual

4 Connect the power cables to the graphics card.

Postrequisites

1 Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
2 Replace the left side-panel. See "Replacing the Left Side-Panel" on
page 27.
3 Follow the steps in "After Working Inside Your Computer" on page 15.

Installing Dual Graphic Cards

1 Locate the second PCI-Express x16 connector on the system board. See
"System-Board Components" on page 20.
2 Align the second graphics card with the second PCI-Express x16 card
connector on the system board.
3 Place the card in the connector and press down firmly. Ensure that the card
is firmly seated in the slot.
4 Replace the screws that secure the second graphics card to the chassis.
5 Connect the dual graphics bridge connecting the two graphics card.
6 Connect the two power cables to the graphics card.
Graphics Card
59