Boot Sequence; Boot/Exit Menu - Dell Alienware Aurora R4 Owner's Manual

User Password:
Set Supervisor Password
Boot
Set Boot Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
5th Boot Device
6th Boot Device
7th Boot Device
Hard Disk Drive BBS
Priorities
CD/DVD ROM Drive BBS
Priorities
Exit
Provides options to
, and
and Reset

Boot Sequence

This feature allows you to change the boot sequence for devices.
Boot Options
• Diskette Drive — The computer attempts to boot from the floppy disk
drive. If no operating system is on the drive, the computer generates an
error message.
Hard Drive — The computer attempts to boot from the primary hard
•
drive. If no operating system is on the drive, the computer generates an
error message.
152
System Setup Utility
Save Changes and Reset
Restore Defaults
Allows you to change the user password.
You cannot use the user password to enter
the BIOS setup, during POST.
Allows you to set a supervisor password.
Displays the first boot device.
Displays the second boot device.
Displays the third boot device.
Displays the fourth boot device.
Displays the fifth boot device.
Displays the sixth boot device.
Displays the seventh boot device.
Sets the hard drive boot priority. The
items displayed are dynamically updated
according to the hard drives detected.
Sets the CD/DVD drive boot priority.
,
Discard Changes
.