Wifi/Bluetooth Assembly; Prerequisites; Removing The Wifi/Bluetooth Card - Dell Alienware Aurora R4 Owner's Manual

WiFi/Bluetooth Assembly

WARNING:
that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

Prerequisites

1 Remove the left side-panel. See "Removing the Left Side-Panel" on
page 25.
2 Open the PCI shroud. See "Opening the PCI Shroud" on page 45.
3 Remove the drive-bay shroud. See "Removing the Drive-Bay Shroud" on
page 47.

Removing the WiFi/Bluetooth Card

1 Disconnect the WiFi/Bluetooth assembly cable from the connector on the
master I/O board.
2 Loosen the thumbscrew that secures the WiFi/Bluetooth assembly to the
chassis.
3 Slide and pull the WiFi/Bluetooth assembly away from the chassis.
Before working inside your computer, read the safety information
WiFi/Bluetooth Assembly
29
137