Removing The Master I/O Board - Dell Alienware Area-51 Service Manual

Removing the Master I/O Board

1. Follow the instructions in "Before You Begin" on page
2. Remove the left side-panel (see "Removing the Left Side-Panel" on page
3. Remove the PCI shroud (see "Removing the PCI Shroud" on page
4. Disconnect all cables from the master I/O board. Note the routing of all
cables as you remove them so that you can re-route them correctly after
installing the new master I/O board.
5. Remove the screw that secures the master I/O board tray to the chassis.
6. Lift the master I/O board tray up and out of the chassis.
NOTE: Do not remove the master I/O board from the master I/O board
tray. The master I/O board tray is shipped together with the replacement
master I/O board.
6.
15).
22).
1 master I/O board tray
CHAPTER 15: MASTER I/O BOARD
2
1
2 screw
077
/
077