Removing The Front Bezel; Replacing The Front Bezel - Dell Alienware Area-51 Service Manual

Removing the Front Bezel

1. Follow the instructions in "Before You Begin" on page
2. Remove the left side-panel (see "Removing the Left Side-Panel" on page
3. Remove the right side-panel (see "Removing the Right Side-Panel" on
page 16).
4. Disconnect the front-bezel cables from the master I/O board connectors.
5. Release the front-bezel clamps that secure the front bezel to the chassis.
6. Pull the front bezel away from the front of the computer.

Replacing the Front Bezel

1. Follow the instructions in "Before You Begin" on page
2. Align the front-bezel clamps with the front-bezel clamp inserts on the
chassis.
3. Push the front bezel towards the computer until the front-bezel clamps
snap into place.
4. Connect the front-bezel cables to the master I/O board connectors.
5. Replace the right side-panel (see "Replacing the Right Side-Panel" on
page 16).
6. Replace the left side-panel (see "Replacing the Left Side-Panel" on page
7. Connect your computer and devices to electrical outlets, and then turn
them on.
6.
15).
6.
15).
1 front bezel
CHAPTER 8: FRONT BEZEL
1
2
2 front-bezel clamps (6)
046
/
046