Adding And Deleting Channels - Mitsubishi TS-4545 Owner's Manual

+
I
Either "In memory" or
"Not in memory" will appear.
Adding and deleting channels
After all available channels have been memorized w:ith the
"Memorize Channels" feature, channels with weaker signals can be
added or deleted with the following procedure.
[] First Time Setup
[] Set the Clock
[] Memorize Channels
[] Add/delete Channels
[] Set AN Network
[] Align Colors
'_ ADJUST to select
ENTER to enter
MENU to go back
O :Press the MF,NU button on the
remote control. The Main Menu
will appear oa the screen.
O Use the ADJUST buttons to
select "First Time Setup." Press
ENTER.
Use the ADJUST buttons to
select "Add/delete Channels."
Press ENTER.
[] Add/delete Channels
Antenna A
I_--_
Indoor/outdoor)
[] Channel : 003ABCD
Net in memory
1
_] DJUST to select
ENTER to add
r_ MENU to go back
O The "Add/delete Channels"
screen will appear. Use the
ADJUST button,; to select the
channel you would like to add
_r delete.
(You can also use the
CHANNEL controls to change
channels.)
_Important:
If a channel is labeled "In memory," use the CANCEL button to
remove it from memory. If a channel is labeled "Not in
memory," use the ENTER button to add it to memory.
When you are finished adding and deleting charnels, press the
HOME button to return to normal TV viewing.
Adding a channel to memory allows you to tune to the channel with
the CHANNEL up/down controls. If a channel is not in memory,
you can only tune to it with the number buttons.
In this menu, you can use the CHANNEL buttons to change
channels.
56 Chapter 3: Operating Your TV