Using Superquickview - Mitsubishi TS-4545 Owner's Manual

SQV
Using SuperQuickView
TM
Supe_QuickView allows you to cycle through a list of up to ten
numbers with the SQV button. Use the menus to add channels to
the list or to remove channels from the list. You can also add
channels directly to the ]list using only the remote control's SQV
button.
[]Advanced Features
[] Use Parental Lock
r_ use SuperQuickView
r_ Convergence ' "
]ADJUST to select
ENTER to enter
MENU to go back
[] Use SuperQuickView
[] ........ [] ........
[] ........ [] ........
[] ........ [] ........
[] ........ [] ........
[] ........ [] ........
[_ADJUST to select
ENTER to enter
I-_ MENU to go back
[] Use SuperQuickView
[] Ant-A --- [] ........
[] ........ [] ........
[] ........ [] ........
[] ........ [] ........
[] ........ [] ........
-'_ ADJUST to select
ENTER to enter
MENU to go back
customizing the Super-
QuickView list with the menus
O Press the MENU button on the
remote control. The Main Menu
wiIl appear on the screen.
Use the ADJUST buttons to
select "Advanced Features."
Press ENTER.
Use the ADJUST buttons to
select "Use SuperQuickView."
Press ENTER.
Use the ADJUST buttons to
select a position in the list.
Press ENTER.
Use the ADJUST buttons to
select the antenna (Ant-A or
Ant-B). Press ENTER. You
can clear the antenna by
pressing CANCEL.
Use the CHANNEL buttons or
number buttons to select the
channel to add to the list; press
ENTER.
Repeat steps _and _ to
,customize the SuperQuickView
memory.
Press the MENU button to exit
this menu.
82 Chapter 3: Operating Your TV