Tv + Separate Uhf And Vhf Antennas - Mitsubishi TS-4545 Owner's Manual

TV + separate UHF and VHF antennas
equipment you will need
If UHF and VHF signals are brought into your home with two
separate antennas, you'll need to combine the antennas in order to
connect them to the TV. To do this you will need a UHF/VHF
combiner. (There are different comb!iners for different kinds of
wires. Check with your local electronics store for the kind of com-
biner you need.)
Pictured to the right; is a
standard combiner.
UHF 1
®®
VHF
®®
J
To connect separate UHF and VHF antennas to your TV:
O Connect the UHF and VHF antenna leads to the appropriate
terminals on the UHF/VHF combiner.
O Press the combiner onto the ANT-A terminal on the rear of the
TV.
\\ I\l
VHF Antenna UHF Antenna
(Channels 2-13) (Channels14-69)
nlil
-
7//
-- Flat Twin Lead
External
Antenna
or Cable
Flat Twin [.ead -
300 Ohm to
75 Ohm
Combiner
Back Side
TV Rear Terminals
28 Chapter 2: Connecting Your TV