Mitsubishi TS-4545 Owner's Manual page 37

TV + Mitsubishi products that have A/V Network
terminals
Important:
The A/V Network is a special system that Mitsubishi developed to
make it easier to use many products with only one remote control.
When the supplied cable is connected between two Mitsubishi
products with the A/V Network, you caza point the remote control at
one product and it will "pass" the remorse control command to the
other.
equipment you will need
• One A/V network cable
(included with the TV).
procedure
_]} Connect one end of the A/V network cable to the ACTIVE A/V
NETWORK terminal on the back of the TV.
O Connect the other end of this cable to the A/V NETWORK IN
terminal on the back: of a Mitsub!ishi component that has A/V
network terminals.
O
You can now use the television remote to contro]L your VCR or
Laser Disc Player. Point the remote directly at the television.
The A/V cable will "pass" the remote commands to the compo-
nent.
The method of connecting the A!V network can change, depending
on which components you have and tlhe way you plan to use your
equipment. More detailed information is contained in tl:,e owner's
guide of each particular Mitsubishi component.
36 Chapter 2: Connecting Your TV