Aligning The Colors - Mitsubishi TS-4545 Owner's Manual

_Important:
_Important:
Aligning the colors
Your Mitsubishi TV has three picture tubes and large diameter
lenses which are aligned to project light beams on the screen. Each
picture tube projects only one color; red, green or blue.
For the best picture, the three colors should be aligned at the
center of screen. You should perform the following :procedure
periodically, or whenever you think that the light beams are out of
alignment.
[] First Time Setup
[] Set the Clock
[] Memorize Channels
[] Add/delete Channels
[] Set A/V Network
[] Align Colors
--] DJUST to select
ENTER "to enter
F_7 MENU to go back
0 Press the MENU button on the
remote control. The Main Menu
will appear on the screen.
O Use the ADJUST
button to
select "First Time Setup." Press
ENTER.
O Select "Align Colors" using the
ADJUST buttons. Press EN-
TER.
[] Align Colors
Press ENTER to select Red or
Blue. Then on each screen press
ADJUST until the cross hairs
appear white.
_ ADJUST to select
ENTER to enter
MENU to go back
O The "Align Colors" screen will
appear. Press ENTER to select
a color to align: red or blue.
O Use the adjust buttons to align
the color yoa selected (red or
blue) with the _.ween lines.
When they ;are aligned, the
green line will turn white.
Red
O Next, use the ENTER button to
select the other color (red or
blue). Use t:he !_DJUST buttons
to align these colored lines with
the green lines.
O After aligning both the red and
blue lines, press the MENU
button to return to the "First
Time Setup:" menu.
The cross-bar pattern is intended for use only as an alignment aid.
It should not be left on for a long period of time, sir_ce it can dam-
age the picture tubes.
The alignment can change over rjr.ae and may need to be adjusted.
If you notice a change in the color quality of the, picture, check the
alignment and readjust as required.
58 Chapter 3: Operating Your TV