Tv + Cable With A Cable Box - Mitsubishi TS-4545 Owner's Manual

TV + cable with a cable box
equipment you will need
Use this hook-up if you do not need a cable box to descramble basic
cable channels, but you do need a cable box to descramble premium
cable channels. This hook-up will allow you to use your TV's
advanced channel changing features, such as SuperQuickView,
while watching basic cable channels on Antenna-A.
To complete the hook-up, you'll need:
one two-way splitter, and
OUT OUT
three lengths of 75 ohm coaxial
cables.
j
procedure
O Connect the incoming cable to the IN terminal on the two-way
splitter.
O Connect a coaxial cable to one of the OUT terminals on the
splitter; connect the other end of thi,_ cable to the ANT-A
terminal on the back of the TV.
Connect the second coaxial cable to the second OUT terminal
on the same splitter; connect the other end of this cable to the
IN terminal on the cable box.
0 Connect the third coaxial cable to the OUT terminal
on the
back of the cable box, and the other end of this cable to the
ANT-B terminal on the back of the TV.
26 Chapter 2: Connecting Your TV