Disconnecting The Camera; Windows 98 And 98 Second Edition; Windows Me, 2000 Professional, And Xp - Konica Minolta DiMAGE Z3 Instruction Manual

DISCONNECTING THE CAMERA

Never disconnect the camera when the access lamp is red - the data or
memory card may permanently be damaged.
Windows 98 / 98 Second Edition
Confirm that the access lamp is not lit. Turn off the camera and then disconnect the USB
cable.

Windows Me, 2000 Professional, and XP

To disconnect the camera, click once on the unplug-or-eject-hardware icon
located on the task bar. A small window will open indicating the device to be
stopped.
Click on the small window to stop
the device. The safe-to-remove-
hardware window will open. Close
the window, turn the camera off,
and then disconnect the USB
cable.
When more than one external device are connected to the computer, repeat the
procedure above except right click on the unplug-or-eject-hardware icon. This will open
the unplug-or-eject-hardware window after clicking on the small window indicating the
unplug-or-eject-hardware routine.
104 D -
ATA TRANSFER MODE