Maytag MER5875RCQ1 Use & Care Manual page 11

Bake
1. Press the Bake pad. ..... ......
* BAKE will flash.
* 000 will flash in the display.
2. Select the oven temperature. Press the U
Autoset 0 pad for 350 ° F or the appropriate Autoset
number pads.
* Each additional press of the Autoset 0 pad will increase
the temperature by 25°.
, The oven temperature can be set from 170° to 550°.
3. Press Bake pad again or wait four seconds.
, BAKE will stop flashing and light in the display.
Baking Notes:
* To change the oven temperature during cooking, press
Bake pad, then press the Autoset 0 pad or appropriate
number pads until the desired temperature is displayed.
* To change the oven temperature during preheat, press
the Bake pad twice, then press the Autoset 0 pad or
appropriate number pads until the desired temperature is
displayed.
* If you forget to turn off the oven, it will automatically turn
off at the end of 12 hours. If you wish to deactivate this
feature, see page 15.
Baking Differences Between Your Old
and New Oven
[t is normal to notice some baking time differences between a
new oven and an old one. See "Adjusting the OvenTemperature"
on page 16.
,, 100° or the actual oven temperature if over 100° F will
display, it will rise in 5° increments until the preset
temperature is reached.
4. Allow the oven to preheat for 8-15 minutes.
, When the set oven temperature is reached, one long
beep will sound.
, The set temperature will display.
, To recall set temperature during preheat, press Bake
pad.
5. Place food in the oven.
6. Check cooking progress at the minimum cooking time.
Cook longer if needed.
7. When cooking is finished, press CANCEL pad.
8. Remove food from the oven.
Baking with Convection
When using convection, enter your normal baking
temperature. The control will automatically reduce the set
oven temperature by 25°. The entered temperature will be
displayed.
To set Convect Bake:
1. Press the Convect Bake pad.
2.
,, BAKE and the fan icon will flash.
, 000 will flash in the display.
Select the oven temperature. Press the
Autoset 0 pad for 350° F or the appropriate
number pads.
0
Autoset
Each additional press of the Autoset 0 pad will increase
the temperature by 25 degrees. The oven temperature
can be set from 170° to 550°.
cont.
10