Analogue Recording F Rom Anexternal S Ource - Philips CDR 765 Owner's Manual

RECORDING
fa,)
• Tocheck theIremaining} recording t ime,pressOISPLA¥.
(This canalsobe done duringrecording)
3 To stop recording, press STOP on the CD Recorder/Player
-1' CD-SYNC and RECORO go out
• Tointerrupt recording,press PAUSE
4 RECORD starts to flash. To resume,pressPLAYon the
CO Recorder/Player
After recording the display will show LlPd,qkE for several
Seconds.
Note:
TheCDRecorder/Playerwill not start until it recognizesa
digital signal. Although the reaction time is less than 200
mi!liseconds`the very beginning of the music may
sometimesnot be recorded.If this happens,you can start
the recordingmanually(see digital recording-
unsynchronized).
Recordingsfrom DATor BCCwill only stop after 20
secondssilence
Analogue recording from_an external source I
Onlymake analog recordingsif digital recordingis not
possible
Preparing for analogue recording
1 Make surethe disc is absolutely free ef scratchesand dust
particles
2 PressSOURCE repeatedlyuntil:
ANALOG a ppearson the display.
t _qno, S'S
I(f(t_
! ANALOG
i
* {f necessaH,press OUALte switch off the OUAL mode;
OUAL w ill no longer appearon the display.
r
ii
3 PressAUTO/MANUALto switch between auto andmanual
track numbering.
-) If Auto is selected )preferred),AUTO TRACK a ppearson
the display.
• AUTO: The track number is automatically incremented
after a silence on the original of at least 3
seconds.
• MANUAL: Tracknumberscan be incrementedmanually by
pressing_. )minimumtrack length is 4
seconds ). (Thiscan also be done in AUTO
mode)
• Tracknumberscannotbe changedafter recording.
#, With the recorder stopped,press RECORD to enter Record
standby mode.
-Ik REGORO
will flash
, q
i _ ' L;, l
i t;_'q ' .... , ,:
16