Cassette Recorder; Playing A Cassette; General Information On Recording - Philips AZ 1508 Instructions For Use Manual

CASSETTE RECORDER
Playing a cassette
1 Select the tape by pressing the CD-TAPE-TUNER button
several times until
E333
appears on the display.
2 Press STOP-OPEN ■ A to open the cassette compartment.
3 Insert a recorded cassette with the open side facing the front
4 Close the cassette compartment by pushing it down.
5 Press PLAY ► to start playback.
6 By pressing
«
or ►► fast winding of the tape is possible in both
directions.
7
To stop the tape press STOP-OPEN ■
A.
Notes: - The keys are automatically released at the end of the tape
.
- /fPLAY ►
or
RECORD •
are depressed, you can not
switch to another sound source.
General information on recording_
Recording is permissible insofar as copyright or other rights of
third parties are not infringed upon.
For recording on this set you should use a cassette of the type
NORMAL (IEC type I). This deck is not suitable for recording on
cassettes of the type CHROME (IEC type n) or METAL (IEC
type IV).
The recording level is set automatically. The controls VOLUME,
DSC and INCREDIBLE SURROUND do not affect the recording.
At the very beginning and end of the tape, no recording will take
place in the 7 seconds during which the leader tape passes the
recorder heads.
Protecting tapes from accidental erasure
Keep the cassette side to be protected in front of you and snap
the left tab. Now, recording on this side is no longer possible.
To record again on this side of the cassette, cover the aperture
with a piece of adhesive tape.
14