Internal Recording What Is Internal Recording; Selecting The Recording Speed; Copying An Entire Cd; Recording All Tracks From A Cd - Philips CDR-795 Manual

Internal recording
What is internal recording?
Recording from the CD player deck of this unit is called
"internal recording".

Selecting the recording speed

It is possible to select the recording speed for internal
recordings.
G
Press SPEED 1·2·4x repeatedly to select either:
REC SPEED 1X: for recording with normal speed
➜
REC SPEED 2X: for recording with double speed while
➜
the sound is muted.
REC SPEED 4X: for recording with 4 times the normal
➜
speed while the sound is muted.
Notes:
Speed selection is not possible during recording.
On some brands of blank audio discs recording at higher
speed is not possible and does not work. In that case select a
lower speed.

Copying an entire CD

This is the easiest way to make a copy of an entire CD,
ready to play on other CD players. However, no other
tracks or CD text can be added.
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Insert the disc you wish to copy in the CD player tray.
3
Press COPY CD to start copying of the entire CD.
➜
is shown, copying starts and the actual recording
REC
time left starts to count down.
Note: If a program was already available before pressing
COPY CD, this will be ignored.
disc will be recorded. After finishing the recording,
shown and the program is available again.
18
Downloaded From Disc-Player.com Philips Manuals
goes off and the current
PROG
is
PROG

Recording all tracks from a CD

You can copy all tracks from a CD and then decide either
to finalize or not to finalize.
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Insert the disc from which you wish to record all tracks in
the CD player tray.
3
Press REC to enter the recording menu.
RECORD CD?, followed by PRESS REC are displayed
➜
alternately.
4
Press REC again to start recording of all tracks.
➜
is shown, recording starts and the actual recording
REC
time left starts to count down.
When you press / OPEN/CLOSE on the CD recorder side,
0 0
CD NOT FINAL and PRESS REC TO FINALIZE are
➜
displayed alternately.
Decide now, either
not to finalize: the CDR is not ready to play on other
CD players, however, other tracks or CD text can still
be added.
Press / OPEN/CLOSE on the CD recorder side again or
wait a few seconds.
➜
The drawer is opened.The CDR(W) is not finalized.
or
to finalize: the CDR is ready to play on other
CD players, however, no other tracks or CD text can
be added.
Press REC to start finalizing.
FINAL is displayed and the actual finalizing time
➜
remaining will start to count down.