Advertisement
HOW TO DISASSEMBLE AND ASSEMBLE
6. WATER TANK AND WATER LINE
1_ The water tank at back and lower part of a refrigerator is
fixed by one screw and has a capacity containing
7
glasses (180cc per glass) of cold water. It will take time
to make more cold water in the tank.
* The first portion of dispensed water is not cold even
though the refrigerator
is working.
In this case,
dispense ice first in the cup and then water to make a
cold water.
7. HOME BAR
7-1. Home Bar related parts
7-2. Home
Bar
parts disassembly and assembly'
1) Disconnect
H/Bar Door Assy O.
2) Loosen two screws (_) attached on the refrigerator
compartment
door with a phillips screwdriver. And
loosen 4 screws (_ and two screws (_. Pull H/Bar door
Assy O. forward to disassemble.
3) Loosen two screws _, 1_)fixed on H/Bar door Assy. and
two screws _) with a cross driver to disassemble arm
Assy.
4) Assemble parts by performing
the disassembly
in
reverse order.
Note : * Assemble carefully parts 0, (_, _ until they are
fixed firmly when assembling
them.
•Adjust extedorgap
by adjusting parts _, (_ and
when assembling.
1.8
1.8
o+
_5
1 DOORASSY, H/BAR
7 SCREWTAPTITE(ARM)
2 SEREW,TAPTiTE(HINGE-WB)
3.SCREW Iv_a.CHI_(HINGE_ !
4 HINGE ASSY H/BAR
5 HINGE ASSY H/BAR
6 CAP,ARM
8 ARM ASSY
9 STOPPER
tl SCREW t,,IACHINE(HINGE-HYE
- 108 -
Advertisement
