HOW TO DISASSEMBLE AND ASSEMBLE
1. DOOR
1) Remove
lower cover and then disconnect
water
supply tube in the lower part of freezer door.
• Pull a water supply tube (_)forward while pressing (_) part
to disconnect water supply tube as shown below.
(3) Disconnect
upper hinge O from a hinge supporter (_)
by grasping the front part of upper hinge and _ifting up
(Hinge Assy, U) in arrow direction _) and pull forward
in arrow _) direction. Be careful as the door may be
fallen down.
I
2) Remove a freezer door.
(1) Loosen hinge cover screw of freezer door and remove
cover.
Disconnect
all connecting lines except eerthing cord.
_
Cover, Hinge
%,;g
Connecting
(2) Turn hinge lever in arrow_
directionuntil it is
loosened and take it outin arrow _) direction.
Lever, Hinge
®
(4) Lift up the freezer door (_) in arrow direction and
disconnect the door from the lower hinge (_). Don't pull
a door forward.
Note : • Lift up a freezer dooruntila water supplytube is
fully takenout.
(5) Assembly
is the reverse order of disassembly
Note : * When disconnecting
refrigerator door, turn hinge
lever counterclockwise.
• If hinge lever or bracket hinge pin is deformed
during assembling freezer and refrigerator
doors,
fix two screws (Tap Tire Screw, M6: Hinge, L fixing
screw) in the hole of upper hinge.
- 104 -