HOW TO DISASSEMBLE AND ASSEMBLE
5. DISPENSER
1) Disconnect
button assembly
by pulling down until it
stops and then pulling forward.
4) Loosen four screws with a phillips screwdriver
and pull a
funnel Assy to disconnect.
Funnel Assy
2) Remove display frame Aesy by making a gap between a
display frame Assy. and funnel Assy. with a batde
screwdriver and pulling it forward. The cover dispenser
is fixed with a hook.
5) Duct cap Assy is disconnected
if hold lever connecting
screw is loosened with a phillips screwdriver,
3) Display Assy can be disconnected
by pressing the
upper part of a cover dispenser and pushing a display
Assy. after disconnecting
display frame Assy. housing.
6) For assembling a duct cap Assy., insert one end of a
spring into the right hole of dispenser lever, and insert
the other end into the dght hole in upper part of
dispenser. And then assemble a holder lever after fixing
a holder at a solenoid Assy working part.
Solenoid Assy
Heater, Sheet
Spring
;Dispenser
- 106 -