Advertisement
HOW TO INSTALL REFRIGERATOR
3-2o Control
the amount
of water
supplied
to the
icemaker.
Caution : • Please unplug the power cord from the wall
outlet and wait for more than three minutes
before disconnecting PWB cover as 310V is
applied in the control panel
1. Disconnect
PWB cover from the upper part of the
refrigerator.
(+) Driver
I
2. Adjust the amount of water supplied by using DIP
switch.
• Water Supplying Time Control C ,tion
SWITCH
NO
Water Suppling
S/W1
S/W2
S/W3
Time
OFF
OFF
OFF
6.5 Sec.
ON
OFF
OFF
5.5 Sac,
OFF
ON
OFF
6 Sec.
ON
ON
OFF
7 Sec.
OFF
OFF
ON
7.5 Sec.
ON
OFF
ON
8 Sec.
OFF
ON
ON
9 Sac.
ON
ON
ON
10 Sec.
1) The water supplying time is set at five seconds when the
refrigerator
is delivered.
2) The amount of water supplied depends on the setting
time and water pressure (city water pressure).
3) If ice cube is too small, increase the water supplying
time. This happens when too small water is supplied into
the ice tray.
4) If ice cube sticks together, decrease the water supplying
time. This happens when too much water is supplied
into the ice tray.
Caution : When adjusting the amount of water supplied,
adjust step by step. Otherwise the water may
spill over.
3. When adjustment of control switch for the amount of
water supplied is complete, check the level of water in
the ice tray.
Confirm the amount
of water
"-.\_'_I_
OpSmum
level )
•
s S
- 24 -
Advertisement
