Advertisement
f
Co
Problems
Causes
Checks
Measures
Remarks
Jce in the freezer
compartment.
- Surface of fan
grille.
- Wall of freezer
compartment.
' - Cool air
discharging pert
- Basket(rack)
area.
Food surface.
- Icing in the
shute.
1) Bad cooling air circulation.
Intake port is colggedin the freezer
compartment.
- Discharging port is Clogged.
- Too much food is stored.
- Bad defrosting.
- Check food storage conditions
visually.(Check
clogging at intake
and discharging
port of cooling air.)
- Check food occupation ratio in
volume(Less
than 75%).
- Check frost on the evaporator
after
dissembling
shroud and fan grille.
- Check icing at intake port of
refrigerator
compartment.
- Be acquainted
with how to use,
- Check defrost (Check ice on the
evaporator
and pipes after forced
defrosting).
- Check the parts related
to defrosting
if the
problem is caused by
the faulty defrosting.
2) Bad freezer compartment door
- Check gasket attachment
- Correct the gasket attachement
- Replace when it can not
. Faulty gasket
conditions,
conditions
and replace it.
be repaired.
- Faulty assembly
- Check door assembly conditions.
- Door assembly and replacement,
3) Over freezing in the freezer
-Replace defective parts.
compartment.
- Faulty MICOM.
Refrigerator
operates pull down.
(Check if it is operated
intermittently)
- The Temperature of freezer
compartment
is satisfactory,
but
over freezing happens in the
refrigerator
compartment
even
though the notch is set at "weak",
- Check frost on the evaporator
after
dissembling
shroud and gdlie.
Check ice on the intake port in the
refrigerator
compartment.
- Check food holds door open.
- Check ice on the ice tray.
4) Bad defrosting.
- Heater wire is cut.
- Faulty defrost sensor.
- Defrosting
cycle
- Check parts related to defrosting.
- Check defrosting.(Check
ice on the
evaporator
and pipes after forced
defrosting.)
- Be acquainted
with how to use.
5) User is not familiar with how to
usa.
- Door opens.
- High moisture
food(water)
is st_ed.
--4
Advertisement
