Audio Connections To Tvs, Dvd Players, Vcrs, Etc - Sharp HT-SB40 Operation Manual

Audio connections to TVs, DVD players, VCRs, etc.

Other connection (without HDMI)
The illustration below shows the flows of audio and video signals.
Audio signal
Video signal
Notes:
●
Refer to the operation manual of the equipment to be connected.
●
Fully insert the plugs to avoid fuzzy pictures or noises.
●
Connecting via this method may disable TV internal speakers.
●
In some cases, a small background noise could emit from the sound bar, when you use the RCA audio output jack
connection from a TV-Set/DVD/Blu-ray Disc Player. In such case, please change the connection to the HDMI/ARC or
headphone jack connection. This effect depends on the used TV/DVD/Blu-ray Disc Player-Brand, model and age, and
it is not a quality matter from the sound bar.
Connecting a TV, or DVD player, etc.
Connect to the TV using an optical digital cable or an audio cable.
Blu-Ray/
DVD player/Digital
Tuner
Optical digital
audio cable
(commercially
available)
Sound Bar
To select OPTICAL function:
Press SOURCE button repeatedly until "OPTICAL" appears on the display.
To select AUDIO IN function:
Press SOURCE button repeatedly until "AUDIO IN" appears on the display.
TV
or
HEADPHONE
jack
To optical
digital audio
output jack
To OPTICAL
IN (optical)
input jack
To audio output jack
To
Audio cable
(commercially
available)
To AUDIO IN
input jacks
E-10
TV
DVD/Blu-ray
Disc Player
Digital tuner, etc.