Table of Contents
Advertisement
" To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news, sports, traffic pro-
gramme, etc. ... see page 26) from the stations in memory.
1
Press the TUNER/BAND button to select the FM band.
2
Press the PTY-TI button.
"PTY TI" and "SELECT" will appear alternately for about 6 seconds.
3
Within 6 seconds, press the
or
type.
Each time the button is pressed, the programme type will appear. If the button is
held down for more than 0.5 seconds, the programme type will appear continu-
ously.
4
Whilst the selected programme type is flashing (within 6 seconds),
press the ENTER button.
After the selected programme type has been lit for 2 seconds, "SEARCH" will ap-
pear, and the search operation will start.
Notes:
! If the display has stopped flashing, start again from step 3.
! If you want to listen to the same programme type of another station, press the
! If no station can be found, "NOTFOUND" will appear for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 4, "TP" will appear. (This does not
mean that you can listen to the traffic information at that time.)
When the traffic information is broadcast, "TA" will appear.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2, etc.) from the sta-
tions stored in memory.
Before starting this operation, you must store one or more station names in memory.
button to select the programme
1
2
3
PTY-TI button whilst the channel number or station name is flashing. The unit will
look for the next station.
Press the TUNER/BAND button to select the FM band.
Press the TUNER PRESET (
or
) button to select a desired station.
The station name will be displayed for 3 seconds. Then the display will change as
follows.
03/3/14
SD-AT1000H_SEEG_E.fm
SD-AT1000H
ENGLISH
1
2
3
4
5
6
7
8
E-28
TINSZ0943AWZZ
Hide quick links:
Advertisement
Table of Contents
