Audio Connections To Tvs, Dvd Players, Vcrs, Etc; Other Connection (Without Hdmi) - Sharp HT-SB602 Operation Manual

System connections (continued)
2. Method 2
This connection is for HDMI TV without ARC (Audio Return Channel).
To HDMI input terminal
To audio output terminal
To Headphone
terminal
To HDMI OUT (TV ARC) output terminal
To select HDMI 1, 2 or TV ARC function (Source):
Sound bar operation: Press INPUT button repeatedly until "HDMI 1", "HDMI 2" or "TV ARC" appears on the display.
Remote control operation: Press the desired HDMI button to select.
Notes:
 This sound bar supports HDMI which enables ARC (Audio Return Channel).
 To enable ARC make sure to use High Speed HDMI™ cable (with ARC).
 This ARC feature requires TV that supports ARC. Refer the operation manual of the TV to determine which terminal supports ARC.
 To listen to the sound from a non-ARC-compatible TV, connect the audio output from TV to this system's. (refer this page)
 This sound bar can be operated (power on/off or volume up/down) via a TV or similar component which supports HDMI CEC
(Consumer Electronics Control). If this does not work, it does not mean this system is faulty. Refer to the operation manual of the
respective component on how to activate the CEC.
Example: Go to the Menu of the component to search and enable the CEC. Different brands may have different naming for the CEC.
For SHARP LCD TV, it is named as AQUOS LINK.
 The system will automatically power off if TV or similar component which supports HDMI CEC, is turned off.
 CEC is not available during Low power consumption mode.
 To listen to the sound from this system, you will need to press the
speaker output settings within the TV menu.
For details, refer to the operation manual of the TV.
 If you are unable to select external speaker setting from the TV menu (E.g. For SHARP LCD TV, it is named as AQUOS
AUDIO SP), turn the CEC OFF and ON again.
 To enjoy 3D images, this system must be connected to a 3D-compatible TV and components (3D BD player, etc.) via High Speed
HDMI cables. Put on the 3D glasses, otherwise 3D images may not be viewed properly.
 If you want to use HDMI IN 1 socket, please use the supplied HDMI cable.

Audio connections to TVs, DVD players, VCRs, etc.

 Other connection (without HDMI)
The illustration below shows the fl ows of audio and video signals.
Audio signal
Video signal
Notes:
 Refer to the operation manual of the equipment to be connected.
 Fully insert the plugs to avoid fuzzy pictures or noises.
 Connecting via this method may disable TV internal speakers.
 In some cases, a small background noise could emit from the sound bar, when you use the RCA audio output
terminal connection from a TV-Set/DVD/Blu-ray Disc Player. In such case, please change the connection to the
HDMI/ARC or headphone terminal connection. This effect depends on the used TV/DVD/Blu-ray Disc Player-
Brand, model and age, and it is not a quality matter from the sound bar.
TV
DVD, Blu-ray disc
player or similar
To HDMI output
Sound Bar
To HDMI input terminal
( )
TV
E-9
terminal
button (refer page 12) or adjust the
DVD/Blu-ray
Disc Player
Digital tuner, etc.