Removing The Humidity-Controlled Clearvue* Crispers - KitchenAid KSSS36QDX05 Use And Care Manual

¢ sing Your Refrigerator
Removing the humidity-controlled CLEARVUE* crispers
The humidity controls on the drawers give you the
ability to change the amount of moisture in the utility
drawer and/or crisper according to what food you store
in it. The humidity-controlled utility drawer and the
crisper are interchangeable. The CLEARVUE section
allows you to see into the drawer/crisper without
opening it.
IMPORTANT: Occasionally, a food item may freeze
in the FRESHCHILL* meat locker, utility drawer, or
crisper. When this occurs, turn the FRESHCHILL
Meat Locker Temperature Control toward cold.
To adjust the humidity control:
• Move the lever to the right for higher humidity and
best storage of fresh, leafy vegetables.
• Move the lever to the left for lower humidity and best
storage of fruits and vegetables with skins.
See "Food Storage Guide" on page 21 for more
information on storing foods properly.
To remove utility drawer/crisper:
1. Roll drawer out to the stop.
2. Lift front of drawer and pull out the rest of the way.
3. Replace in reverse order.
To remove glass covers:
1. Lift right side of glass cover to free retainer and left
side of cover.
2. Carefully remove glass cover.
To replace glass cover:
1. PLace retainer on right side of glass cover.
2. Insert left side of glass cover into groove on left side
of drawer.
3. Lower cover so that the retainer pins are in the
guide holes on right side of drawer.
To remove CLEARVUE section:
1. Remove glass cover.
2. Slide CLEARVUE section down track, away from
the retainer.
3. Replace in reverse order.
t
10