KitchenAid KSRX25FSBL00 Use & Care Manual page 6

NOTE: For S tyle 1,after a djusting therefrigerator
temperature, wait 2 4hours a nd thenrecheck theFREEZER
temperature before m aking a dditional adjustments.
CONDITION: SETTING
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Control
one setting lower
REFRIGERATOR too warm REFRIGERATOR Control
one setting higher
FREEZER too cold FREEZER Control
one setting lower
FREEZER too warm/too little ice FREEZER Control
one setting higher
Electronic Controls (on some models)
FREEZER REFRIGERA_R
_ C0LD C010ER f,,_ COLD COLDER
0000000
_123@567
turn the refriger_or on, press and hold ON_FF for 2 seconds.
The indicator lights show the current temperature
control seftings.
Adjusting Electronic Controls
Settings to the left of the mid-sefting make the temperature less
cold. Settings to the right of the mid-sefting make the temperature
colder.
• Press the FREEZER or REFRIGERATOR arrow to move the
indicator light to the right, one setting at a time. Continue
moving the indicator light until it is at the desired setting.
NOTE: With each press of the arrow, you will hear a beep as
the light moves to the next setting. The indicator light moves
to a setting of "7" and then returns to the setting of "1 ."
CONDITION: SETTING ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Control
one setting lower
REFRIGERATOR too warm REFRIGERATOR Control
one setting higher
FREEZER too cold FREEZER Control
one setting lower
FREEZER too warm/too little ice FREEZER Control
one setting higher
Accelerated Ice Production
This feature assists with temporary periods of heavy ice usage by
increasing ice production over a 24-hour period.
• Press ICE touch pad to set the freezer temperature to -10°F
(-23°C). The Accelerated Ice setting will remain on for
24 hours unless manually turned off. The display will continue
to show your normal temperature set point.
Q
NOTE: If increased ice production is desired at all times, set
the Freezer Control to a colder setting. Adjusting the freezer to
a colder temperature may make some foods, such as ice
cream, harder.
Digital Controls (on some models)
Warmer FREEZER REFRIGERATOR Warmer
i+
Colder Colder
To turn the refrigerator on, press and hold POWER (ON/OFF) for
2 seconds.The factory recommended set points are 0°F (-18°C)
for the freezer and 37°F (3°C) for the refrigerator.
NOTES:
• To view Celsius temperatures, press the °C SELECT pad. The
indicator will light up. To return the display setting to
Fahrenheit, press the °C SELECT pad again.
• If the freezer temperature is below zero, the negative sign next
to the freezer display will light up.
Adjusting Digital Controls
The set point range for the freezer is -5°F to 5°F (-21 °C to -15°C).
The set point range for the refrigerator is 33°F to 41 °F (1 °C to
5°C).
• To adjust the set point temperatures, press the refrigerator or
freezer PLUS (+) or MINUS (-) pad until the desired
temperature is reached.
CONDITION: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Control
1° lower
REFRIGERATOR too warm REFRIGERATOR Control
1° higher
FREEZER too cold FREEZER Control
1° lower
FREEZER too warm/too little ice FREEZER Control
1° higher
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full
grocery loads, or temporarily warm room temperatures.
• Press MAX COOL pad to turn on the Max Cool feature. The
Max Cool indicator light will remain on for 24 hours unless
manually turned off.
NOTE: The temperature display will not change. After
24 hours, the refrigerator returns to the previous temperature
set points.