NEC Storage Performance Monitor/Optimizer User Manual page 56

Chapter 3 Operations of Performance Monitoring Function
(Note 1)
A performance monitor server using older version software may not support some of the threshold monitoring
conditions specifying functions. In such a case, the Customize Threshold Monitoring Conditions dialog is not
displayed. For displaying the dialog, software of the latest version is required.
(4) Customize Resetting Threshold Excess State
On the Numeric Table screen, selecting [Threshold Monitoring]
menu displays the Customize Resetting Threshold Excess State dialog (Figure 3-19) appears. (Note 1)
The Customize Resetting Threshold Excess State dialog specifies the following information:
It cancels in the period which the value below a threshold continues.
When exceeding the number of times of the specified threshold monitoring interval, threshold excess state is
canceled individually for each monitoring items. In case of no setting for releasing threshold excess, uncheck
[Reset Threshold Excess state according to the period below a threshold] check box.
It cancels at the appointed time.
At the appointed time, threshold excess state is canceled for the entire monitoring disk array. In case of no
setting for releasing threshold excess, uncheck [Reset Threshold Excess state at the appointed time] check box.
After specifying the above settings, clicking [OK] button defines the values as the condition to auto release threshold
excess state and the Customize Resetting Threshold Excess State dialog closes. By clicking [Cancel] button, specified
values are ignored. Retaining the values shown at opening Customize Resetting Threshold Excess State dialog, the
dialog closes.
Figure 3-19 Customize Resetting Threshold Excess State Dialog
I-50
[Customize Resetting Threshold Excess State]