NEC Storage Performance Monitor/Optimizer User Manual page 41

(4) Registering/Deleting logical disks to be monitored
When you click [Setting] and then select [Monitoring Object Logical Disk] on the Numeric Table screen (Figure
3-2), the Registration of Logical Disks dialog box appears (Figure 3-3). This dialog allows you to change the
logical disks for performance monitoring in the disk array specified in the combo box of the Numeric Table.
[Monitoring Candidate List] displays unregistered logical disks among all the logical disks created in the
specified disk array. [Monitor Object ] displays all the logical disks currently registered as monitoring objects.
Selecting logical disks in [Monitoring Candidate List] and clicking the [Add] button will register the specified
logical disks to the [Monitor Object] list. On the other hand, selecting logical disks in the [Monitor Object] list
and clicking the [Delete] button will delete the specified logical disks from the [Monitor Object] list.
When you click the [OK] button, all the logical disks currently displayed in the [Monitor Object] list are formally
registered as the monitored logical disks and the dialog box closes. When you click the [Cancel] button, the
current [Monitor Object] list is ignored and the dialog box closes with the monitored logical disks registered
when the dialog box opened unchanged.
(5) Registering/Deleting physical disks to be monitored
When you click [Setting] and select [Monitoring Object Physical Disk] on the Numeric Table screen, the
Registration of Physical Disks dialog box appears (Figure 3-4). This screen allows you to register physical disks
for performance monitoring among the physical disks installed in the disk array specified in the combo box of the
original screen.
Chapter 3 Operations of Performance Monitoring Function
Figure 3-3 Registration of Logical Disks Dialog
I-35